How to Create Your Own Dog Mask – The Basics

  • by

In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques which you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other regions of the house, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so that you get something which looks like a cone. The most important thing here is to be realistic with what type of paper plate that you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can ensure that nothing will leak when you place the mask on. Be sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it will best inground dog fence leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you’re done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Be certain it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged securely onto the surface of your dog. Do not make the folds too large or else it could look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Be sure that the ears are level and be certain it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask because your dog protection, you will have to do some sanding to make certain it is secure on your dog. You can accomplish it by sanding off any excess paper which might have been removed from your mask.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *